Details
The chamber shrink wrapping machine is an all in one shrink wrap solution for presentation quality wrapping. It is the lowest cost method of producing a presentation quality shrink wrap.
The machine uses a single phase, 13 amp supply and since the machine is mounted on lockable castors it is easily moved about. Speed of operation is around 300 products per hour and requires an operator to be present at all times to load and un-load the product.
The product being wrapped is manually loaded into the centrefolded film. The chamber hood is brought down manually and is automatically locked in position using a solenoid.
The sealing wire cuts and seals the film before hot air is blown around the chamber causing the film to shrink. After a preset time the solenoid disengages and the hood is lifted up by hand.
Alternatively, if no heat is applied the product is sealed in a loose bag. Both Polyolefin and PVC films can be used with chamber machines.
The Wraps UK range comprises of two machines, the Combo 55 and for larger products the Combo 85. The Combo 55 can wrap a product up to 420 x 550 mm and the Combo 85 can wrap a product up to 600 x 860 mm.